Lab test machines manufacturers & suppliers

Home / All / Battery Test Machine /

Battery Flammability Test Chamber丨Battery Burning Test Chamber丨Battery Projectile Tester

Battery Flammability Test Chamber丨Battery Burning Test Chamber丨Battery Projectile Tester

Battery Flammability Test Chamber丨Battery Burning Test Chamber丨Battery Projectile Tester
Battery Flammability Test Chamber丨Battery Burning Test Chamber丨Battery Projectile TesterBattery Flammability Test Chamber丨Battery Burning Test Chamber丨Battery Projectile TesterBattery Flammability Test Chamber丨Battery Burning Test Chamber丨Battery Projectile Tester
CategoriesBattery Test Machine
BrandHUDA Test Machine Manufacturer
ModelHUD-H209
Diameter of test hole100±2mm
Inner dimensions750x750x500mm
Outside dimensions1000x950x1310mm
Control methodpush-button
Flame time0~99H99M, can be set
FOB portshenzhen
Terms of PaymentL/C, D/A, D/P, T/T, Paypal
Update TimeOct 5,2024
Detail Information
Battery Burning Test Chamber

Battery Burning Test Chamber is suitable for the flame resistance test of lithium batteries (or battery packs). 

Test Standard

UL 1642:2012 "Lithium Battery Standard"

UN38.3(2012) "Recommendations on the Transport of Dangerous Goods-Manual of Tests and Standards" Part III

IEC62133-2012 "Safety requirements for batteries and battery packs containing alkaline or non-acid electrolytes"

GB/T 31241-2014   "Safety requirements for lithium-ion batteries and battery packs for portable electronic products"

Features
Operations

Drill a round hole with a diameter of 102mm on an experimental platform, and place a steel wire mesh on the round hole, place the battery under test on the steel wire mesh screen, install an octagonal aluminum wire mesh around the sample, and then ignite The burner heats the sample until the battery explodes or the battery burns out, and the combustion process is timed.



Safety System

* Explosion-proof pressure relief device

* Smoke exhaust device

* Fire extinguishing system

* Electronic door lock system

* Safety stop switch

Parameters

1. Control method

 PLC touch screen control;

2. Burner

 Bunsen burner, the inner diameter of the tube mouth is 10mm, and the length is about 100mm;

3. Flame application time

 0~99H99M, can be set;

4. Diameter of test hole

 100±2mm;

5. Test sieve

 a sieve made of stainless steel wire woven with a diameter of 0.43mm (0.017inch), containing 20 meshes per inch;

6. The height of the flame from the screen

 38mm;

7. Octagonal mesh cover

 the distance between each pair of faces is 24" (that is, 610mm), and the eight faces are movable, which is convenient for replacement and disassembly;

8. The height of the octagonal net cover

 12" (that is, 305mm);

9. Octagonal cover material

aluminum mesh,composed of 0.25mm diameter aluminum wire woven into a mesh containing 16-18 meshes per inch

10. Material of battery mesh

 stainless steel mesh;

11. Combustion gas

 methane or liquefied petroleum gas (customer-provided);

12. Inner dimensions

 750x750x500mm (width x depth x height);

13. Outside dimensions

 1000x950x1310mm (width x depth x height, including door lock);

14. Pressure relief door size

 200x200mm;

15. Smoke exhaust pipe

 diameter φ100mm, located at the back of the box;

16. Box door

 a single door opens to the left, and an explosion-proof chain is installed on the side of the box door;

17. Power supply

 1, 220V, 50/60Hz, 200W

18. Equipment weight

 about 160kg

Details

PLC Touch Screen

Easy to operate

Inner Chamber

Inner Chamber

Test hole diameter 100±2mm

Octagon Mesh Enclosure

Place samples, diameter 610mm, height 305mm

Exhaust Port + Pressure Relief Door

Relieve pressure and exhaust smoke to assure safe

Find what you want! Contact us to know more!
*Email
Tel
*Title
*Content
Upload
  • Only supports .rar/.zip/.jpg/.png/.gif/.doc/.xls/.pdf, maximum 20MB.

Since 2004, HUDA has been focusing on innovation in environmental test machine, battery test machine, rubber and plastic testing machines, UTM, etc., with rich experiences and a proactive attitude.

News