Since 2004, HUDA has been focusing on innovation in environmental test machine, battery test machine, rubber and plastic testing machines, UTM, etc., with rich experiences and a proactive attitude.
Lab test machines manufacturers & suppliers
Two Zones Thermal Shock Test Chamber 丨 High-Low Temperature Test Equipment
Two Zones Thermal Shock Test Chamber 丨 High-Low Temperature Test Equipment
Item | Specification |
Test method | Pneumatic operated, two chambers |
Basket internal dimension | 350W*400D*350Hmm (300L) |
External chamber dimension | 1230Wx1830Dx1270Hmm |
High temperature chamber preheating range | Ambient to +160℃, <35min |
Low temperature chamber precooling range | Ambient to -50℃, <70min |
Test temperature | -40 to +150℃ |
Temperature deviation | 3~5℃ |
Lifting switch time | ≤10 seconds |
Test duration | >30mins in high temperature chamber / low temperature chamber |
Test hole for cable routing | Diameter 50mm on the left of chamber attach a silicone plug |
External chamber material | High quality electrolytic steel plate spray with powder, antirust |
Internal material | SUS#304 stainless steel |
Thermal insulation material | High quality superfine glass fiber |
Refrigerant | R404A / R23 |
Cooling method | Water cooling |
Power supply | Three phase, 380V, 50Hz |
High temperature chamber:
1, Including three parts: heater, draught fan and air duct valve
2, Draught fan cyclically stirs hot air through heater
3, The basket with testing product drive to high temperature range when doing high temperature impact test.
Low temperature chamber:
1, Including four parts: evaporator, energy storage piece, draught fan and air duct valve
2, Draught fan cyclically stirs cold air through evaporator and energy storage piece.
3, The basket with testing product drive to low temperature range when doing low temperature impact test.
Drive device:
Pneumatic cylinder: drive basket with testing product to high and low temperature chamber
Air compressor: Provide the compressed air for driving pneumatic door (supplied by buyer)
Refrigerating device:
Cooling system: complex overlapping efficient cryogenic loop system
Compressor: Bock compressor
Refrigerant: environmental protection refrigerant R23/R404A
Condensation: Stainless steel welded plate heat exchanger
Controller:
Operate interface: PLC controller, touch screen
Program memory capacity: 100 groups
Setting range: Time: 1 minute ~ 99 hour 59 minute, cycles: 1~ 9999cycles
Resolution: temperature: 0.01 ℃
Input: T thermocouple
Control method: PID auto calculation control
Additional functions:
Timer, over temperature and power failure protection, alarm, record test curve, emergency stop, display test time
Standard configuration: indication lamp of test chamber, time meter, test hole for wire routing, 6pcs castor, 4pcs adjust wheel.
Safety device:
Power overload protection
Leakage protection
Control circuit overload protection
Short-circuit protection
Compressor overload protection
Ground protection
Over temperature protection
Audible and visual alarm
- Tel
- *Title
- *Content
- Electric Vehicle Recalls and SafetyWith the gradual promotion of new energy vehicles, the number of recalls and complaints is also gradually increasing.
- China Brand DayChinese brand, shared by the world...