Since 2004, HUDA has been focusing on innovation in environmental test machine, battery test machine, rubber and plastic testing machines, UTM, etc., with rich experiences and a proactive attitude.
Lab test machines manufacturers & suppliers
High Frequency Electromagnetic Vibration Table
Detail Information
Introduction
Applications
Electromagnetic vibration table is widely used in defense, aviation, aerospace, communications, electronics, automobiles, home appliances, and other industries.
It is used for discovering the early faults, simulating the actual working condition and the structure strength test,the test effect is remarkable and reliable.
Sine wave, FM, sweep, programmable, frequency multiplier, logarithm, maximum acceleration, amplitude modulation, time control, full function computer control, simple fixed acceleration/fixed amplitude.
1 Sine force: 3KN-50KN
2 Horizontal + Vertical Vibration
3 X,Y,Z three-axis sinusoidal vibration tests、broadband random vibration tests
4 Noise≤68db
5 Customize:test size, speed,dimension...
6 Protection devices:over-thermal, over-load, over-current, over-voltage, and over-displacement...
Parameter
Vibration Shaker | ||
Sine force (peak) | 30kN | |
Shock force (peak) | 60 kN | |
Frequency range | 5~2,600 Hz | |
Displacement (continuous) | 100 mm | |
Max. Velocity | 1.8 m/s | |
Max. Acceleration | 75 G | |
Armature Diameter | 445 mm | |
1st order resonant frequency | 2,400 Hz | |
Allowable eccentric moment | >500 Nxm | |
Armature weight | 40 kg | |
HE/ST screw dimension | M10 (metric) | |
Axial vibration isolation frequency | <3 Hz | |
Max. Payload | 500 kg | |
Magnetic flux leakage | ≤1 mT | |
Dimensions (L×W×H, unpacked) | 1,330x860x1,250 mm | |
Weight (unpacked) | 2,500 kg | |
Installation | Rubber mat (anchor bolts required) | |
Power Amplifier | ||
Amplifier output | 30 kVA | |
SNR | >65 dB | |
Rated output voltage | 120 Vrms | |
Amplifier efficiency | > 90% | |
Dimensions (L×W×H, unpacked) | 800x900x2,100 mm | |
Weight (unpacked) | 500 kg | |
Blower | ||
Air volume | 0.46 m3/s | |
Power | 7.5 kW | |
Air duct diameter | 200 mm | |
Air pressure | 8.8kPa | |
Installation | Able to connect to ceiling (up to two 90 degree bends), max 20’ run | |
Horizontal Slip Table | ||
Dimensions | 600x600 mm | |
Thickness | 45 mm | |
Frequency limit | 2,000 Hz | |
Effective mass | 54 kg | |
Note: 1. High pressure oil-film bearing is used for better uniformity. | ||
Vibration Controller and Accelerometer | ||
Vibration Controller VT-9008-4 | 4 Channel Vibration Controller with Sine and Self Calibration. | |
Accelerometer EA-YD-181 | 100mV/g, Range: 50g, Working Freq.: 1-10kHz, Weight: 11gram, with 10ft low noise cable | |
Other supported functions/accessories | ||
Environmental chambers | Supported | |
Mobile devices | Customizable | |
Insulation boards | Customizable | |
Fixture | Customizable | |
Working environment of the system | ||
Temperature range | 0-40℃ | |
Humidity range | 0~90% , no condensation | |
Power requirements | 380V/3ph/50Hz, 40kVA | |
Compressed air pressure | 0.6 Mpa | |
Pictures
- If any questions or interests about this machine,please feel free to contact us to know more./contact-us.htm
- contact us
Related Products
Find what you want! Contact us to know more!
- Tel
- *Title
- *Content
Navigation
News
Electric Vehicle Recalls and SafetyWith the gradual promotion of new energy vehicles, the number of recalls and complaints is also gradually increasing.
China Brand DayChinese brand, shared by the world...