Lab test machines manufacturers & suppliers

Home / All / Battery Test Machine /

Battery Altitude Test Chamber丨High Altitude Low Pressure Simulation Test Chamber

Battery Altitude Test Chamber丨High Altitude Low Pressure Simulation Test Chamber

Battery Altitude Test Chamber丨High Altitude Low Pressure Simulation Test Chamber
Battery Altitude Test Chamber丨High Altitude Low Pressure Simulation Test ChamberBattery Altitude Test Chamber丨High Altitude Low Pressure Simulation Test ChamberBattery Altitude Test Chamber丨High Altitude Low Pressure Simulation Test Chamber
CategoriesBattery Test Machine
BrandHUDA Test Machine Manufacturer
ModelHUD-H204
Internal materialSUS#304 stainless steel, thickness 3mm
External materialA3 cold plate paint treatment, thickness 1.5mm
Pressure range0.5~100Kpa, common test air pressure is 11.6 Kpa
Pressure fluctuation≤5%
Inside dimensions400x400x400mm
Outside dimensions650x620x1310mm
FOB portshenzhen
Terms of PaymentL/C, D/A, D/P, T/T, Paypal
Update TimeOct 5,2024
Detail Information

Application

Battery Altitude Test Chamber is designed for UL, EN, IEC and other standard test requirements. It can reach the low-pressure storage state of the sample in a short time. It can automatically control the test cycle, monitor the air pressure change in the box during the whole process, and realize the automatic termination of the test. The simulated battery and battery pack are stored for 6 hours at a pressure equal to or lower than 11.6kPa and an ambient temperature of (20±5)°C. If the battery has no leakage, no exhaust, no disassembly, no rupture, and no fire, and every The open circuit voltage of a test cell or battery pack after the test is not less than 90% of its voltage before the simulation test, which is considered qualified.

Standards

GB/T 31485-2015 "Safety requirements and test methods for power batteries for electric vehicles"

GB/T 31241-2014 "Safety requirements for lithium-ion batteries and battery packs for portable electronic products"

UN 38.3 "United Nations Manual of Tests and Standards for Transport of Dangerous Goods"

IEC 62133 "Battery (pack) composed of batteries and safety requirements for portable equipment"

UL 1642:2012 "Lithium Battery Standard"

Main Parameters

1. Internal material

 SUS#304 stainless steel, thickness 3mm;

2. External material

 A3 cold plate paint treatment, thickness 1.5mm;

3. Pressure range

 0.5100Kpa, common test air pressure is 11.6 Kpa;

4. Material of storage partition

 stainless steel;

5. The number of storage partitions

 1;

6. Control mode

 push-button control;

5. Vacuum degree display

 SMC digital display vacuum meter control, accurate display of vacuum degree, easy to set vacuum degree;

6. Timer

 LED digital display, can be set within 0-99H99M;

7. Inner box size

 400x400x400mm (width x depth x height);

8. Dimensions

 650x620x1310mm (width x depth x height, including door lock);

9. Observation window

 Two-layer tempered glass with a size of 250x250mm, equipped with stainless steel mesh;

10. Pressure fluctuation

 5%;

11. Equipment power supply

 AC220V, 50HZ, 2.2KW;

Find what you want! Contact us to know more!
*Email
Tel
*Title
*Content
Upload
  • Only supports .rar/.zip/.jpg/.png/.gif/.doc/.xls/.pdf, maximum 20MB.

Since 2004, HUDA has been focusing on innovation in environmental test machine, battery test machine, rubber and plastic testing machines, UTM, etc., with rich experiences and a proactive attitude.

News