News

UV lamp for the gas discharge lamp, gas discharge lamp is divided into arc discharge and glow discharge, UV curing UV light commonly used for the arc discharge lamp, its working principle is: in the vacuum of quartz tube by adding quantitative high-purity mercury (mercury) , By providing voltage difference (pressure drop) across the electrodes, resulting in ion discharge, resulting in ultraviolet radiation.

1 dust testing machine / dust (dust) test box is mainly used for the shell protection level standards in the IP5X and IP6X two levels of testing.
2 Suitable for sealing performance test and reliability test of the product, check the sealing performance of the electronic and electrical products, automobile, motorcycle parts, seals, etc.

Waterproof test chamber suitable for testing the waterproof performance of automotive lighting, wiper performance, waterproof strip, locomotive and low voltage electrical enclosure protection

Salt spray test chamber adapted to the surface treatment of various materials, electroplating, organic and inorganic coating, anode processing, antirust oil and so on, after these anti-corrosive treatment to test the corrosion resistance of their products.

Anti-yellowing aging test chamber for the simulation of the sun's ultraviolet radiation and heat, the sample in the machine by the role of ultraviolet radiation and temperature, after a period of time, observe the degree of yellowing resistance of the sample can be used as a reference gray stained gray, Determine the level of its yellowing.

Thermal Shock Test Chamber is used to test the bearing extent of the material structures and composite material in an instant and continuous high temperature and extremely low temperature environment, which is in the shortest time to test its thermal expansion and contraction caused by chemical change or physical harm.

Constant Temperature And Humidity Chamber is mainly used in testing the adaptability of electronics, electrical appliances, food, automobile, rubber and plastic, metal and other products, parts and materials in the high and low temperature alternating hot and humid environment when storage, transport and using.

Environmental Test Chamber is mainly used in testing the adaptability of electronics, electrical appliances, food, automobile, rubber and plastic, metal and other products.

Environmental test chamber is an reliable test equipment for all kinds of electronic, electrical, electronics, plastics raw materials and devices to do testing such as cold, heat, moisture, resistance to dry and the quality control

An environmental chamber, also called climatic chamber or climate chamber, applicable to aerospace products, information, electronic instruments and meters, materials, electrical engineering, electronic products, various electronic components in high and low temperature environment，the extent of damage to its performance indicators.

Walk-in chambers are complex systems that can push the limits of lab space and utilities— works to design a system that suits our clients’ test requirements.

Walk-in chambers are complex systems that can push the limits of lab space and utilities—CLIMATE works to design a system that suits our clients’ test requirements.

Salt spray test chamber adapted to the surface treatment of various materials, electroplating, organic and inorganic coating, anode processing, anti-rust oil and so on, after these anti-corrosive treatment to test the corrosion resistance of their products.

UV Weathering Test Chamber can simulate the sun, rain spray and condensation resulting damage to test the materials by exposure to sunlight with moisture and temperature.
This test machine can get the results of damage after several days or weeks which is equal to expose to outside for a few months. The damages include fading, discoloration, brightness down, powder, crack, blur, brittle, strength decreases and oxidation.

Anti-Yellowing aging test chamber can promote the deterioration of sulfur rubber, to calculate the tensile strength and elongation before and after heating rate of change, generally considered to be tested at 70 degrees a day, in theory, equivalent to exposure to the atmosphere for a period of 6 months.

Salt spray test can be divided into two kinds: neutral salt spray and acid salt spray. The difference is that the standard is different from the test method, which is called "NSS" and "CASS" test.

Thermal Shock Test Chamber is used to test the bearing extent of the material structures and composite material in an instant and continuous high temperature and extremely low temperature environment, which is in the shortest time to test its thermal expansion and contraction caused by chemical change or physical harm.